自分メモ:DS215j NAS HDD障害(エラーが増えている)2022/01/18 ファームウェア更新

SynologyのNAS DSシリーズはとても良くできたハードウェアです。

ファームウェアをアップデート後、動作が遅いことを確認しました。

ログインすると「メディア変換中」のアイコンが、アップデート後6日間つきっぱなして、CPUのリソースを消費していました。

HDD1に問題があるようなので、今後継続してモニターし そのうち機種変更を行います。

以下、確認時の記録。

Storage Manager上では正常に動作しているように見えるが。。。

HDD1のエラー値が上昇している

HDD2は問題なく動作している

HDDのエラーログに、HDD1の記録が多数。

今後の対応

DS215jの導入から6年を経過しているため、HDDのエラー値の推移を確認し、然るべきタイミングでDS220jなどの機種に更新する。

機種変更にあたっては

1.DS220Jに既存HDDを追加。

2.DS220Jへ容量の大きなHDDを追加し、HDD容量拡大。

が確実かと。

Synology NAS移行に関する有益なURL:

Synology Official ストレージ容量を拡張するために Drive を交換する

NASのHDDを交換してストレージ容量を増やす方法

写真のRAWデータや動画素材の保存用にNASをRAID1(ミラーリング)で運用しているのですが、ストレージ残量が1TB未

家のNASが壊れたのでデータ移行した【Synology DiskStation DS215j→DS218j】

Synology DS216jのストレージ容量アップ〜HDD交換からデータ復旧までの手順〜

NASとして使っているsynology DS216jから「利用可能な容量が減っています」と警告メールが届くようになりました。HDDの容量が残り少なくなっています。現在の3TBのHDDから6TBに容量アップを行いました。

参考)dmesg -Tで表示した、カーネルレベルのHDD障害記録。
[Tue Jan 18 17:12:50 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:12:50 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:12:50 2022] sda5 auto_remap 0
[Tue Jan 18 17:12:50 2022] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6
[Tue Jan 18 17:12:50 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:12:50 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:50 2022] ata1.00: cmd 60/20:00:d0:70:5e/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 17:12:50 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:12:50 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:50 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:50 2022] ata1.00: failed command: WRITE FPDMA QUEUED
[Tue Jan 18 17:12:50 2022] ata1.00: cmd 61/08:08:70:8d:22/00:00:00:00:00/40 tag 1 ncq 4096 out
[Tue Jan 18 17:12:50 2022]          res 41/40:04:d0:70:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:12:50 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:50 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:50 2022] ata1.00: failed command: WRITE FPDMA QUEUED
[Tue Jan 18 17:12:50 2022] ata1.00: cmd 61/10:10:d0:03:8a/00:00:24:00:00/40 tag 2 ncq 8192 out
[Tue Jan 18 17:12:50 2022]          res 41/40:04:d0:70:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:12:50 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:50 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:50 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:50 2022] ata1.00: cmd 60/08:18:28:f2:10/00:00:00:00:00/40 tag 3 ncq 4096 in
[Tue Jan 18 17:12:50 2022]          res 41/40:04:d0:70:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:12:50 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:50 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:50 2022] ata1: hard resetting link
[Tue Jan 18 17:12:51 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:12:51 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:12:51 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:51 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:51 2022] ata1: EH complete
[Tue Jan 18 17:12:54 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:12:54 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:12:54 2022] sda5 auto_remap 0
[Tue Jan 18 17:12:54 2022] ata1.00: exception Emask 0x0 SAct 0x1f SErr 0x0 action 0x6
[Tue Jan 18 17:12:54 2022] ata1.00: edma_err_cause=02000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:12:54 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:54 2022] ata1.00: cmd 60/30:00:58:4b:11/00:00:00:00:00/40 tag 0 ncq 24576 in
[Tue Jan 18 17:12:54 2022]          res 41/40:24:08:4c:11/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:12:54 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:54 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:54 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:54 2022] ata1.00: cmd 60/18:08:b8:4b:11/00:00:00:00:00/40 tag 1 ncq 12288 in
[Tue Jan 18 17:12:54 2022]          res 41/40:24:08:4c:11/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:12:54 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:54 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:54 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:54 2022] ata1.00: cmd 60/18:10:e8:4b:11/00:00:00:00:00/40 tag 2 ncq 12288 in
[Tue Jan 18 17:12:54 2022]          res 41/40:24:08:4c:11/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:12:54 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:54 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:54 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:54 2022] ata1.00: cmd 60/20:18:d0:70:5e/00:00:06:00:00/40 tag 3 ncq 16384 in
[Tue Jan 18 17:12:54 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:12:54 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:54 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:54 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:54 2022] ata1.00: cmd 60/40:20:08:4c:11/00:00:00:00:00/40 tag 4 ncq 32768 in
[Tue Jan 18 17:12:54 2022]          res 41/40:24:08:4c:11/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:12:54 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:54 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:54 2022] ata1: hard resetting link
[Tue Jan 18 17:12:55 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:12:55 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:12:55 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:55 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:55 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:55 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:55 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:55 2022] ata1: EH complete
[Tue Jan 18 17:12:59 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:12:59 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:12:59 2022] sda5 auto_remap 0
[Tue Jan 18 17:12:59 2022] ata1.00: exception Emask 0x0 SAct 0xe2 SErr 0x0 action 0x6
[Tue Jan 18 17:12:59 2022] ata1.00: edma_err_cause=02000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:12:59 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:59 2022] ata1.00: cmd 60/20:08:d0:70:5e/00:00:06:00:00/40 tag 1 ncq 16384 in
[Tue Jan 18 17:12:59 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:12:59 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:59 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:59 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:59 2022] ata1.00: cmd 60/18:28:80:e2:04/00:00:00:00:00/40 tag 5 ncq 12288 in
[Tue Jan 18 17:12:59 2022]          res 41/40:14:e0:03:8a/40:00:24:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:12:59 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:59 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:59 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:59 2022] ata1.00: cmd 60/50:30:b0:e2:04/00:00:00:00:00/40 tag 6 ncq 40960 in
[Tue Jan 18 17:12:59 2022]          res 41/40:14:e0:03:8a/40:00:24:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:12:59 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:59 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:59 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:12:59 2022] ata1.00: cmd 60/18:38:28:83:60/00:00:00:00:00/40 tag 7 ncq 12288 in
[Tue Jan 18 17:12:59 2022]          res 41/40:14:e0:03:8a/40:00:24:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:12:59 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:12:59 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:12:59 2022] ata1: hard resetting link
[Tue Jan 18 17:12:59 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:12:59 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:12:59 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:59 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:59 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:59 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:12:59 2022] ata1: EH complete
[Tue Jan 18 17:13:03 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:13:03 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:13:03 2022] sda5 auto_remap 0
[Tue Jan 18 17:13:03 2022] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6
[Tue Jan 18 17:13:03 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:13:03 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:03 2022] ata1.00: cmd 60/18:00:28:83:60/00:00:00:00:00/40 tag 0 ncq 12288 in
[Tue Jan 18 17:13:03 2022]          res 41/40:1c:d0:70:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:13:03 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:03 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:03 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:03 2022] ata1.00: cmd 60/50:08:b0:e2:04/00:00:00:00:00/40 tag 1 ncq 40960 in
[Tue Jan 18 17:13:03 2022]          res 41/40:1c:d0:70:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:13:03 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:03 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:03 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:03 2022] ata1.00: cmd 60/18:10:80:e2:04/00:00:00:00:00/40 tag 2 ncq 12288 in
[Tue Jan 18 17:13:03 2022]          res 41/40:1c:d0:70:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:13:03 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:03 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:03 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:03 2022] ata1.00: cmd 60/20:18:d0:70:5e/00:00:06:00:00/40 tag 3 ncq 16384 in
[Tue Jan 18 17:13:03 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:13:03 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:03 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:03 2022] ata1: hard resetting link
[Tue Jan 18 17:13:03 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:13:03 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:13:03 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:03 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:03 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:03 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:03 2022] ata1: EH complete
[Tue Jan 18 17:13:07 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:13:07 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:13:07 2022] sda5 auto_remap 0
[Tue Jan 18 17:13:07 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:13:07 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:13:07 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:07 2022] ata1.00: cmd 60/20:00:d0:70:5e/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 17:13:07 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:13:07 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:07 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:07 2022] ata1: hard resetting link
[Tue Jan 18 17:13:08 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:13:08 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:13:08 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:08 2022] ata1: EH complete
[Tue Jan 18 17:13:11 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:13:11 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:13:11 2022] sda5 auto_remap 0
[Tue Jan 18 17:13:11 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:13:11 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:13:11 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:11 2022] ata1.00: cmd 60/20:00:d0:70:5e/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 17:13:11 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:13:11 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:11 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:11 2022] ata1: hard resetting link
[Tue Jan 18 17:13:12 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:13:12 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:13:12 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:12 2022] sd 0:0:0:0: [sda] Unhandled sense code
[Tue Jan 18 17:13:12 2022] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
[Tue Jan 18 17:13:12 2022] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
[Tue Jan 18 17:13:12 2022] Descriptor sense data with sense descriptors (in hex):
[Tue Jan 18 17:13:12 2022]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[Tue Jan 18 17:13:12 2022]         06 5e 70 d0
[Tue Jan 18 17:13:12 2022] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
[Tue Jan 18 17:13:12 2022] sd 0:0:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 00 06 5e 70 d0 00 00 00 20 00 00
[Tue Jan 18 17:13:12 2022] end_request: I/O error, dev sda, sector 106852560
[Tue Jan 18 17:13:12 2022] md/raid1:md2: sda5: rescheduling sector 97397232
[Tue Jan 18 17:13:12 2022] ata1: EH complete
[Tue Jan 18 17:13:16 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:13:16 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:13:16 2022] sda5 auto_remap 0
[Tue Jan 18 17:13:16 2022] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6
[Tue Jan 18 17:13:16 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:13:16 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:16 2022] ata1.00: cmd 60/08:08:d0:70:5e/00:00:06:00:00/40 tag 1 ncq 4096 in
[Tue Jan 18 17:13:16 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:13:16 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:16 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:16 2022] ata1: hard resetting link
[Tue Jan 18 17:13:16 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:13:16 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:13:16 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:16 2022] ata1: EH complete
[Tue Jan 18 17:13:20 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:13:20 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:13:20 2022] sda5 auto_remap 0
[Tue Jan 18 17:13:20 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:13:20 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:13:20 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:20 2022] ata1.00: cmd 60/08:00:d0:70:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:13:20 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:13:20 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:20 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:20 2022] ata1: hard resetting link
[Tue Jan 18 17:13:20 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:13:20 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:13:20 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:20 2022] ata1: EH complete
[Tue Jan 18 17:13:24 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:13:24 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:13:24 2022] sda5 auto_remap 0
[Tue Jan 18 17:13:24 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:13:24 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:13:24 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:24 2022] ata1.00: cmd 60/08:00:d0:70:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:13:24 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:13:24 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:24 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:24 2022] ata1: hard resetting link
[Tue Jan 18 17:13:24 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:13:24 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:13:24 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:24 2022] ata1: EH complete
[Tue Jan 18 17:13:28 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:13:28 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:13:28 2022] sda5 auto_remap 0
[Tue Jan 18 17:13:28 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:13:28 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:13:28 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:28 2022] ata1.00: cmd 60/08:00:d0:70:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:13:28 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:13:28 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:28 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:28 2022] ata1: hard resetting link
[Tue Jan 18 17:13:29 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:13:29 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:13:29 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:29 2022] ata1: EH complete
[Tue Jan 18 17:13:32 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:13:32 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:13:32 2022] sda5 auto_remap 0
[Tue Jan 18 17:13:32 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:13:32 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:13:32 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:32 2022] ata1.00: cmd 60/08:00:d0:70:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:13:32 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:13:32 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:32 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:32 2022] ata1: hard resetting link
[Tue Jan 18 17:13:33 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:13:33 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:13:33 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:33 2022] ata1: EH complete
[Tue Jan 18 17:13:36 2022] ata1.00: read unc at 106852560
[Tue Jan 18 17:13:36 2022] lba 106852560 start 9453280 end 5860326239
[Tue Jan 18 17:13:36 2022] sda5 auto_remap 0
[Tue Jan 18 17:13:36 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:13:36 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:13:36 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:13:36 2022] ata1.00: cmd 60/08:00:d0:70:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:13:36 2022]          res 41/40:00:d0:70:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:13:36 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:13:36 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:13:36 2022] ata1: hard resetting link
[Tue Jan 18 17:13:37 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:13:37 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:13:37 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:13:37 2022] sd 0:0:0:0: [sda] Unhandled sense code
[Tue Jan 18 17:13:37 2022] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
[Tue Jan 18 17:13:37 2022] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
[Tue Jan 18 17:13:37 2022] Descriptor sense data with sense descriptors (in hex):
[Tue Jan 18 17:13:37 2022]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[Tue Jan 18 17:13:37 2022]         06 5e 70 d0
[Tue Jan 18 17:13:37 2022] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
[Tue Jan 18 17:13:37 2022] sd 0:0:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 00 06 5e 70 d0 00 00 00 08 00 00
[Tue Jan 18 17:13:37 2022] end_request: I/O error, dev sda, sector 106852560
[Tue Jan 18 17:13:37 2022] ata1: EH complete
[Tue Jan 18 17:13:37 2022] md/raid1:md2: read error corrected (8 sectors at 97399280 on sda5)
[Tue Jan 18 17:13:37 2022] read error corrected, md2, sda5 index [0], sector 97399280 [fix_read_error]
[Tue Jan 18 17:13:37 2022] md/raid1:md2: redirecting sector 97397232 to other mirror: sdb5
[Tue Jan 18 17:14:05 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:05 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:05 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:05 2022] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6
[Tue Jan 18 17:14:05 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:05 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:05 2022] ata1.00: cmd 60/20:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 17:14:05 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:05 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:05 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:05 2022] ata1.00: failed command: WRITE FPDMA QUEUED
[Tue Jan 18 17:14:05 2022] ata1.00: cmd 61/58:08:38:c0:20/00:00:00:00:00/40 tag 1 ncq 45056 out
[Tue Jan 18 17:14:05 2022]          res 41/40:0c:a8:38:1f/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:14:05 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:05 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:05 2022] ata1: hard resetting link
[Tue Jan 18 17:14:06 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:06 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:06 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:06 2022] ata1: EH complete
[Tue Jan 18 17:14:09 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:09 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:09 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:09 2022] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6
[Tue Jan 18 17:14:09 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:09 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:09 2022] ata1.00: cmd 60/20:08:00:65:5e/00:00:06:00:00/40 tag 1 ncq 16384 in
[Tue Jan 18 17:14:09 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:09 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:09 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:09 2022] ata1: hard resetting link
[Tue Jan 18 17:14:10 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:10 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:10 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:10 2022] ata1: EH complete
[Tue Jan 18 17:14:13 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:13 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:13 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:13 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:14:13 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:13 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:13 2022] ata1.00: cmd 60/20:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 17:14:13 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:13 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:13 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:13 2022] ata1: hard resetting link
[Tue Jan 18 17:14:14 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:14 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:14 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:14 2022] ata1: EH complete
[Tue Jan 18 17:14:18 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:18 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:18 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:18 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:14:18 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:18 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:18 2022] ata1.00: cmd 60/20:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 17:14:18 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:18 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:18 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:18 2022] ata1: hard resetting link
[Tue Jan 18 17:14:18 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:18 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:18 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:18 2022] ata1: EH complete
[Tue Jan 18 17:14:22 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:22 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:22 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:22 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:14:22 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:22 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:22 2022] ata1.00: cmd 60/20:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 17:14:22 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:22 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:22 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:22 2022] ata1: hard resetting link
[Tue Jan 18 17:14:22 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:22 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:22 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:22 2022] ata1: EH complete
[Tue Jan 18 17:14:26 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:26 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:26 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:26 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:14:26 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:26 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:26 2022] ata1.00: cmd 60/20:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 17:14:26 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:26 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:26 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:26 2022] ata1: hard resetting link
[Tue Jan 18 17:14:26 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:26 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:26 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:26 2022] sd 0:0:0:0: [sda] Unhandled sense code
[Tue Jan 18 17:14:26 2022] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
[Tue Jan 18 17:14:26 2022] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
[Tue Jan 18 17:14:26 2022] Descriptor sense data with sense descriptors (in hex):
[Tue Jan 18 17:14:26 2022]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[Tue Jan 18 17:14:26 2022]         06 5e 65 00
[Tue Jan 18 17:14:26 2022] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
[Tue Jan 18 17:14:26 2022] sd 0:0:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 00 06 5e 65 00 00 00 00 20 00 00
[Tue Jan 18 17:14:26 2022] end_request: I/O error, dev sda, sector 106849536
[Tue Jan 18 17:14:26 2022] md/raid1:md2: sda5: rescheduling sector 97394208
[Tue Jan 18 17:14:26 2022] ata1: EH complete
[Tue Jan 18 17:14:30 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:30 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:30 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:30 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:14:30 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:30 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:30 2022] ata1.00: cmd 60/08:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:14:30 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:30 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:30 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:30 2022] ata1: hard resetting link
[Tue Jan 18 17:14:31 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:31 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:31 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:31 2022] ata1: EH complete
[Tue Jan 18 17:14:34 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:34 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:34 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:34 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:14:34 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:34 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:34 2022] ata1.00: cmd 60/08:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:14:34 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:34 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:34 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:34 2022] ata1: hard resetting link
[Tue Jan 18 17:14:35 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:35 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:35 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:35 2022] ata1: EH complete
[Tue Jan 18 17:14:38 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:38 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:38 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:38 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:14:38 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:38 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:38 2022] ata1.00: cmd 60/08:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:14:38 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:38 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:38 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:38 2022] ata1: hard resetting link
[Tue Jan 18 17:14:39 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:39 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:39 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:39 2022] ata1: EH complete
[Tue Jan 18 17:14:42 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:42 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:42 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:42 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:14:43 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:43 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:43 2022] ata1.00: cmd 60/08:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:14:43 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:43 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:43 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:43 2022] ata1: hard resetting link
[Tue Jan 18 17:14:43 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:43 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:43 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:43 2022] ata1: EH complete
[Tue Jan 18 17:14:47 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:47 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:47 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:47 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:14:47 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:47 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:47 2022] ata1.00: cmd 60/08:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:14:47 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:47 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:47 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:47 2022] ata1: hard resetting link
[Tue Jan 18 17:14:47 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:47 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:47 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:47 2022] ata1: EH complete
[Tue Jan 18 17:14:51 2022] ata1.00: read unc at 106849536
[Tue Jan 18 17:14:51 2022] lba 106849536 start 9453280 end 5860326239
[Tue Jan 18 17:14:51 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:51 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 17:14:51 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:51 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:51 2022] ata1.00: cmd 60/08:00:00:65:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:14:51 2022]          res 41/40:00:00:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:51 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:51 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:51 2022] ata1: hard resetting link
[Tue Jan 18 17:14:51 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:51 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:51 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:51 2022] sd 0:0:0:0: [sda] Unhandled sense code
[Tue Jan 18 17:14:51 2022] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
[Tue Jan 18 17:14:51 2022] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
[Tue Jan 18 17:14:51 2022] Descriptor sense data with sense descriptors (in hex):
[Tue Jan 18 17:14:51 2022]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[Tue Jan 18 17:14:51 2022]         06 5e 65 00
[Tue Jan 18 17:14:51 2022] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
[Tue Jan 18 17:14:51 2022] sd 0:0:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 00 06 5e 65 00 00 00 00 08 00 00
[Tue Jan 18 17:14:51 2022] end_request: I/O error, dev sda, sector 106849536
[Tue Jan 18 17:14:51 2022] ata1: EH complete
[Tue Jan 18 17:14:52 2022] md/raid1:md2: read error corrected (8 sectors at 97396256 on sda5)
[Tue Jan 18 17:14:52 2022] read error corrected, md2, sda5 index [0], sector 97396256 [fix_read_error]
[Tue Jan 18 17:14:55 2022] ata1.00: read unc at 106849552
[Tue Jan 18 17:14:55 2022] lba 106849552 start 9453280 end 5860326239
[Tue Jan 18 17:14:55 2022] sda5 auto_remap 0
[Tue Jan 18 17:14:55 2022] ata1.00: exception Emask 0x0 SAct 0x3f SErr 0x0 action 0x6
[Tue Jan 18 17:14:55 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:14:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:55 2022] ata1.00: cmd 60/08:00:10:65:5e/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:14:55 2022]          res 41/40:00:10:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:14:55 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:55 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:55 2022] ata1.00: cmd 60/08:08:80:40:2c/00:00:00:00:00/40 tag 1 ncq 4096 in
[Tue Jan 18 17:14:55 2022]          res 41/40:04:10:65:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:14:55 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:55 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:55 2022] ata1.00: cmd 60/28:10:f0:2d:2c/00:00:00:00:00/40 tag 2 ncq 20480 in
[Tue Jan 18 17:14:55 2022]          res 41/40:04:10:65:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:14:55 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:55 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:55 2022] ata1.00: cmd 60/10:18:38:2e:2c/00:00:00:00:00/40 tag 3 ncq 8192 in
[Tue Jan 18 17:14:55 2022]          res 41/40:04:10:65:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:14:55 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:55 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:55 2022] ata1.00: cmd 60/58:20:58:2e:2c/00:00:00:00:00/40 tag 4 ncq 45056 in
[Tue Jan 18 17:14:55 2022]          res 41/40:04:10:65:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:14:55 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:55 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:14:55 2022] ata1.00: cmd 60/10:28:c0:2e:2c/00:00:00:00:00/40 tag 5 ncq 8192 in
[Tue Jan 18 17:14:55 2022]          res 41/40:04:10:65:5e/40:00:06:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:14:55 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:14:55 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:14:55 2022] ata1: hard resetting link
[Tue Jan 18 17:14:56 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:14:56 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:14:56 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:56 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:56 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:56 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:56 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:56 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:14:56 2022] ata1: EH complete
[Tue Jan 18 17:15:00 2022] ata1.00: read unc at 106849552
[Tue Jan 18 17:15:00 2022] lba 106849552 start 9453280 end 5860326239
[Tue Jan 18 17:15:00 2022] sda5 auto_remap 0
[Tue Jan 18 17:15:00 2022] ata1.00: exception Emask 0x0 SAct 0x1f0 SErr 0x0 action 0x6
[Tue Jan 18 17:15:00 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:15:00 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:00 2022] ata1.00: cmd 60/08:20:80:40:2c/00:00:00:00:00/40 tag 4 ncq 4096 in
[Tue Jan 18 17:15:00 2022]          res 41/40:44:78:41:2c/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:00 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:00 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:00 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:00 2022] ata1.00: cmd 60/08:28:10:65:5e/00:00:06:00:00/40 tag 5 ncq 4096 in
[Tue Jan 18 17:15:00 2022]          res 41/40:00:10:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:15:00 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:00 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:00 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:00 2022] ata1.00: cmd 60/08:30:c8:40:2c/00:00:00:00:00/40 tag 6 ncq 4096 in
[Tue Jan 18 17:15:00 2022]          res 41/40:44:78:41:2c/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:00 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:00 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:00 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:00 2022] ata1.00: cmd 60/08:38:20:41:2c/00:00:00:00:00/40 tag 7 ncq 4096 in
[Tue Jan 18 17:15:00 2022]          res 41/40:44:78:41:2c/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:00 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:00 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:00 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:00 2022] ata1.00: cmd 60/08:40:78:41:2c/00:00:00:00:00/40 tag 8 ncq 4096 in
[Tue Jan 18 17:15:00 2022]          res 41/40:44:78:41:2c/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:00 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:00 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:00 2022] ata1: hard resetting link
[Tue Jan 18 17:15:00 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:15:00 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:15:00 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:00 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:00 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:00 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:00 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:00 2022] ata1: EH complete
[Tue Jan 18 17:15:04 2022] ata1.00: read unc at 106849552
[Tue Jan 18 17:15:04 2022] lba 106849552 start 9453280 end 5860326239
[Tue Jan 18 17:15:04 2022] sda5 auto_remap 0
[Tue Jan 18 17:15:04 2022] ata1.00: exception Emask 0x0 SAct 0x1f SErr 0x0 action 0x6
[Tue Jan 18 17:15:04 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:15:04 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:04 2022] ata1.00: cmd 60/08:00:78:41:2c/00:00:00:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 17:15:04 2022]          res 41/40:24:80:40:2c/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:04 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:04 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:04 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:04 2022] ata1.00: cmd 60/08:08:20:41:2c/00:00:00:00:00/40 tag 1 ncq 4096 in
[Tue Jan 18 17:15:04 2022]          res 41/40:24:80:40:2c/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:04 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:04 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:04 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:04 2022] ata1.00: cmd 60/08:10:c8:40:2c/00:00:00:00:00/40 tag 2 ncq 4096 in
[Tue Jan 18 17:15:04 2022]          res 41/40:24:80:40:2c/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:04 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:04 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:04 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:04 2022] ata1.00: cmd 60/08:18:10:65:5e/00:00:06:00:00/40 tag 3 ncq 4096 in
[Tue Jan 18 17:15:04 2022]          res 41/40:00:10:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:15:04 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:04 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:04 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:04 2022] ata1.00: cmd 60/08:20:80:40:2c/00:00:00:00:00/40 tag 4 ncq 4096 in
[Tue Jan 18 17:15:04 2022]          res 41/40:24:80:40:2c/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:04 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:04 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:04 2022] ata1: hard resetting link
[Tue Jan 18 17:15:04 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:15:05 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:15:05 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:05 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:05 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:05 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:05 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:05 2022] ata1: EH complete
[Tue Jan 18 17:15:08 2022] ata1.00: read unc at 106849552
[Tue Jan 18 17:15:08 2022] lba 106849552 start 9453280 end 5860326239
[Tue Jan 18 17:15:08 2022] sda5 auto_remap 0
[Tue Jan 18 17:15:08 2022] ata1.00: exception Emask 0x0 SAct 0x1f SErr 0x0 action 0x6
[Tue Jan 18 17:15:08 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:15:08 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:08 2022] ata1.00: cmd 60/30:00:28:1f:24/00:00:00:00:00/40 tag 0 ncq 24576 in
[Tue Jan 18 17:15:08 2022]          res 41/40:24:e8:1f:24/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:08 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:08 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:08 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:08 2022] ata1.00: cmd 60/08:08:10:65:5e/00:00:06:00:00/40 tag 1 ncq 4096 in
[Tue Jan 18 17:15:08 2022]          res 41/40:00:10:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:15:08 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:08 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:08 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:08 2022] ata1.00: cmd 60/08:10:60:1f:24/00:00:00:00:00/40 tag 2 ncq 4096 in
[Tue Jan 18 17:15:08 2022]          res 41/40:24:e8:1f:24/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:08 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:08 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:08 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:08 2022] ata1.00: cmd 60/08:18:c0:1f:24/00:00:00:00:00/40 tag 3 ncq 4096 in
[Tue Jan 18 17:15:08 2022]          res 41/40:24:e8:1f:24/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:08 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:08 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:08 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:08 2022] ata1.00: cmd 60/d0:20:e8:1f:24/00:00:00:00:00/40 tag 4 ncq 106496 in
[Tue Jan 18 17:15:08 2022]          res 41/40:24:e8:1f:24/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:08 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:08 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:08 2022] ata1: hard resetting link
[Tue Jan 18 17:15:09 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:15:09 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:15:09 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:09 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:09 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:09 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:09 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:09 2022] ata1: EH complete
[Tue Jan 18 17:15:12 2022] ata1.00: read unc at 106849552
[Tue Jan 18 17:15:12 2022] lba 106849552 start 9453280 end 5860326239
[Tue Jan 18 17:15:12 2022] sda5 auto_remap 0
[Tue Jan 18 17:15:12 2022] ata1.00: exception Emask 0x0 SAct 0x1cfe SErr 0x0 action 0x6
[Tue Jan 18 17:15:12 2022] ata1.00: edma_err_cause=02000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:15:12 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:12 2022] ata1.00: cmd 60/08:08:40:b8:11/00:00:00:00:00/40 tag 1 ncq 4096 in
[Tue Jan 18 17:15:12 2022]          res 41/40:64:80:39:00/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:12 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:12 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:12 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:12 2022] ata1.00: cmd 60/08:10:38:39:00/00:00:00:00:00/40 tag 2 ncq 4096 in
[Tue Jan 18 17:15:12 2022]          res 41/40:64:80:39:00/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:12 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:12 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:12 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:12 2022] ata1.00: cmd 60/08:18:10:65:5e/00:00:06:00:00/40 tag 3 ncq 4096 in
[Tue Jan 18 17:15:12 2022]          res 41/40:00:10:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:15:12 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:12 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:12 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:12 2022] ata1.00: cmd 60/18:20:60:b8:11/00:00:00:00:00/40 tag 4 ncq 12288 in
[Tue Jan 18 17:15:12 2022]          res 41/40:64:80:39:00/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:13 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:13 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:13 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:13 2022] ata1.00: cmd 60/08:28:80:cf:61/00:00:00:00:00/40 tag 5 ncq 4096 in
[Tue Jan 18 17:15:13 2022]          res 41/40:64:80:39:00/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:13 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:13 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:13 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:13 2022] ata1.00: cmd 60/10:30:80:b8:11/00:00:00:00:00/40 tag 6 ncq 8192 in
[Tue Jan 18 17:15:13 2022]          res 41/40:64:80:39:00/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:13 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:13 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:13 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:13 2022] ata1.00: cmd 60/20:38:a0:b8:11/00:00:00:00:00/40 tag 7 ncq 16384 in
[Tue Jan 18 17:15:13 2022]          res 41/40:64:80:39:00/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:13 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:13 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:13 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:13 2022] ata1.00: cmd 60/08:50:50:39:00/00:00:00:00:00/40 tag 10 ncq 4096 in
[Tue Jan 18 17:15:13 2022]          res 41/40:64:80:39:00/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:13 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:13 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:13 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:13 2022] ata1.00: cmd 60/10:58:60:39:00/00:00:00:00:00/40 tag 11 ncq 8192 in
[Tue Jan 18 17:15:13 2022]          res 41/40:64:80:39:00/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:13 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:13 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:13 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:13 2022] ata1.00: cmd 60/08:60:80:39:00/00:00:00:00:00/40 tag 12 ncq 4096 in
[Tue Jan 18 17:15:13 2022]          res 41/40:64:80:39:00/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:13 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:13 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:13 2022] ata1: hard resetting link
[Tue Jan 18 17:15:13 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:15:13 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:15:13 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:13 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:13 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:13 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:13 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:13 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:13 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:13 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:13 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:13 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:13 2022] ata1: EH complete
[Tue Jan 18 17:15:17 2022] ata1.00: read unc at 106849552
[Tue Jan 18 17:15:17 2022] lba 106849552 start 9453280 end 5860326239
[Tue Jan 18 17:15:17 2022] sda5 auto_remap 0
[Tue Jan 18 17:15:17 2022] ata1.00: exception Emask 0x0 SAct 0xaf SErr 0x0 action 0x6
[Tue Jan 18 17:15:17 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 17:15:17 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:17 2022] ata1.00: cmd 60/38:00:68:62:2d/00:00:00:00:00/40 tag 0 ncq 28672 in
[Tue Jan 18 17:15:17 2022]          res 41/40:1c:88:63:2d/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:17 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:17 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:17 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:17 2022] ata1.00: cmd 60/90:08:c8:62:2d/00:00:00:00:00/40 tag 1 ncq 73728 in
[Tue Jan 18 17:15:17 2022]          res 41/40:1c:88:63:2d/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:17 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:17 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:17 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:17 2022] ata1.00: cmd 60/10:10:70:63:2d/00:00:00:00:00/40 tag 2 ncq 8192 in
[Tue Jan 18 17:15:17 2022]          res 41/40:1c:88:63:2d/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:17 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:17 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:17 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:17 2022] ata1.00: cmd 60/68:18:88:63:2d/00:00:00:00:00/40 tag 3 ncq 53248 in
[Tue Jan 18 17:15:17 2022]          res 41/40:1c:88:63:2d/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:17 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:17 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:17 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:17 2022] ata1.00: cmd 60/08:28:80:cf:61/00:00:00:00:00/40 tag 5 ncq 4096 in
[Tue Jan 18 17:15:17 2022]          res 41/40:1c:88:63:2d/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 17:15:17 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:17 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:17 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 17:15:17 2022] ata1.00: cmd 60/08:38:10:65:5e/00:00:06:00:00/40 tag 7 ncq 4096 in
[Tue Jan 18 17:15:17 2022]          res 41/40:00:10:65:5e/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 17:15:17 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 17:15:17 2022] ata1.00: error: { UNC }
[Tue Jan 18 17:15:17 2022] ata1: hard resetting link
[Tue Jan 18 17:15:18 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 17:15:18 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 17:15:18 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:18 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:18 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:18 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:18 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:18 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 17:15:18 2022] sd 0:0:0:0: [sda] Unhandled sense code
[Tue Jan 18 17:15:18 2022] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
[Tue Jan 18 17:15:18 2022] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
[Tue Jan 18 17:15:18 2022] Descriptor sense data with sense descriptors (in hex):
[Tue Jan 18 17:15:18 2022]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[Tue Jan 18 17:15:18 2022]         06 5e 65 10
[Tue Jan 18 17:15:18 2022] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
[Tue Jan 18 17:15:18 2022] sd 0:0:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 00 06 5e 65 10 00 00 00 08 00 00
[Tue Jan 18 17:15:18 2022] end_request: I/O error, dev sda, sector 106849552
[Tue Jan 18 17:15:18 2022] ata1: EH complete
[Tue Jan 18 17:15:18 2022] md/raid1:md2: read error corrected (8 sectors at 97396272 on sda5)
[Tue Jan 18 17:15:18 2022] read error corrected, md2, sda5 index [0], sector 97396272 [fix_read_error]
[Tue Jan 18 17:15:18 2022] md/raid1:md2: redirecting sector 97394208 to other mirror: sda5
[Tue Jan 18 20:11:14 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:14 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:14 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:14 2022] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6
[Tue Jan 18 20:11:14 2022] ata1.00: edma_err_cause=02000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:14 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:14 2022] ata1.00: cmd 60/20:00:88:18:b0/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 20:11:14 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:14 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:14 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:14 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:14 2022] ata1.00: cmd 60/08:08:60:65:91/00:00:03:00:00/40 tag 1 ncq 4096 in
[Tue Jan 18 20:11:14 2022]          res 41/40:14:68:50:95/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 20:11:14 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:14 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:14 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:14 2022] ata1.00: cmd 60/08:10:68:50:95/00:00:00:00:00/40 tag 2 ncq 4096 in
[Tue Jan 18 20:11:14 2022]          res 41/40:14:68:50:95/40:00:00:00:00/40 Emask 0x9 (media error)
[Tue Jan 18 20:11:14 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:15 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:15 2022] ata1: hard resetting link
[Tue Jan 18 20:11:15 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:15 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:15 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:15 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:15 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:15 2022] ata1: EH complete
[Tue Jan 18 20:11:19 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:19 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:19 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:19 2022] ata1.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x6
[Tue Jan 18 20:11:19 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:19 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:19 2022] ata1.00: cmd 60/20:10:88:18:b0/00:00:06:00:00/40 tag 2 ncq 16384 in
[Tue Jan 18 20:11:19 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:19 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:19 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:19 2022] ata1: hard resetting link
[Tue Jan 18 20:11:19 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:19 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:19 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:19 2022] ata1: EH complete
[Tue Jan 18 20:11:23 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:23 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:23 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:23 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 20:11:23 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:23 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:23 2022] ata1.00: cmd 60/20:00:88:18:b0/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 20:11:23 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:23 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:23 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:23 2022] ata1: hard resetting link
[Tue Jan 18 20:11:23 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:23 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:23 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:23 2022] ata1: EH complete
[Tue Jan 18 20:11:27 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:27 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:27 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:27 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 20:11:27 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:27 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:27 2022] ata1.00: cmd 60/20:00:88:18:b0/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 20:11:27 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:27 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:27 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:27 2022] ata1: hard resetting link
[Tue Jan 18 20:11:27 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:27 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:28 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:28 2022] ata1: EH complete
[Tue Jan 18 20:11:31 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:31 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:31 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:31 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 20:11:31 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:31 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:31 2022] ata1.00: cmd 60/20:00:88:18:b0/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 20:11:31 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:31 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:31 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:31 2022] ata1: hard resetting link
[Tue Jan 18 20:11:32 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:32 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:32 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:32 2022] ata1: EH complete
[Tue Jan 18 20:11:35 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:35 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:35 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:35 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 20:11:35 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:35 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:35 2022] ata1.00: cmd 60/20:00:88:18:b0/00:00:06:00:00/40 tag 0 ncq 16384 in
[Tue Jan 18 20:11:35 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:35 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:35 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:35 2022] ata1: hard resetting link
[Tue Jan 18 20:11:36 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:36 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:36 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:36 2022] sd 0:0:0:0: [sda] Unhandled sense code
[Tue Jan 18 20:11:36 2022] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
[Tue Jan 18 20:11:36 2022] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
[Tue Jan 18 20:11:36 2022] Descriptor sense data with sense descriptors (in hex):
[Tue Jan 18 20:11:36 2022]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[Tue Jan 18 20:11:36 2022]         06 b0 18 88
[Tue Jan 18 20:11:36 2022] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
[Tue Jan 18 20:11:36 2022] sd 0:0:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 00 06 b0 18 88 00 00 00 20 00 00
[Tue Jan 18 20:11:36 2022] end_request: I/O error, dev sda, sector 112203912
[Tue Jan 18 20:11:36 2022] md/raid1:md2: sda5: rescheduling sector 102748584
[Tue Jan 18 20:11:36 2022] ata1: EH complete
[Tue Jan 18 20:11:40 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:40 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:40 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:40 2022] ata1.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x6
[Tue Jan 18 20:11:40 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:40 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:40 2022] ata1.00: cmd 60/08:10:98:18:b0/00:00:06:00:00/40 tag 2 ncq 4096 in
[Tue Jan 18 20:11:40 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:40 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:40 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:40 2022] ata1: hard resetting link
[Tue Jan 18 20:11:40 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:40 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:40 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:40 2022] ata1: EH complete
[Tue Jan 18 20:11:44 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:44 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:44 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:44 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 20:11:44 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:44 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:44 2022] ata1.00: cmd 60/08:00:98:18:b0/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 20:11:44 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:44 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:44 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:44 2022] ata1: hard resetting link
[Tue Jan 18 20:11:44 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:44 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:44 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:44 2022] ata1: EH complete
[Tue Jan 18 20:11:48 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:48 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:48 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:48 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 20:11:48 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:48 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:48 2022] ata1.00: cmd 60/08:00:98:18:b0/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 20:11:48 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:48 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:48 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:48 2022] ata1: hard resetting link
[Tue Jan 18 20:11:49 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:49 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:49 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:49 2022] ata1: EH complete
[Tue Jan 18 20:11:52 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:52 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:52 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:52 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 20:11:52 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:52 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:52 2022] ata1.00: cmd 60/08:00:98:18:b0/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 20:11:52 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:52 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:52 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:52 2022] ata1: hard resetting link
[Tue Jan 18 20:11:53 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:53 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:53 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:53 2022] ata1: EH complete
[Tue Jan 18 20:11:56 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:11:56 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:11:56 2022] sda5 auto_remap 0
[Tue Jan 18 20:11:56 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 20:11:56 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:11:56 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:11:56 2022] ata1.00: cmd 60/08:00:98:18:b0/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 20:11:56 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:11:56 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:11:56 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:11:56 2022] ata1: hard resetting link
[Tue Jan 18 20:11:57 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:11:57 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:11:57 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:11:57 2022] ata1: EH complete
[Tue Jan 18 20:12:00 2022] ata1.00: read unc at 112203928
[Tue Jan 18 20:12:00 2022] lba 112203928 start 9453280 end 5860326239
[Tue Jan 18 20:12:00 2022] sda5 auto_remap 0
[Tue Jan 18 20:12:00 2022] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[Tue Jan 18 20:12:00 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Tue Jan 18 20:12:00 2022] ata1.00: failed command: READ FPDMA QUEUED
[Tue Jan 18 20:12:00 2022] ata1.00: cmd 60/08:00:98:18:b0/00:00:06:00:00/40 tag 0 ncq 4096 in
[Tue Jan 18 20:12:00 2022]          res 41/40:00:98:18:b0/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Tue Jan 18 20:12:00 2022] ata1.00: status: { DRDY ERR }
[Tue Jan 18 20:12:00 2022] ata1.00: error: { UNC }
[Tue Jan 18 20:12:00 2022] ata1: hard resetting link
[Tue Jan 18 20:12:01 2022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[Tue Jan 18 20:12:01 2022] ata1.00: configured for UDMA/133
[Tue Jan 18 20:12:01 2022] ata1: UNC RTF LBA Restored
[Tue Jan 18 20:12:01 2022] sd 0:0:0:0: [sda] Unhandled sense code
[Tue Jan 18 20:12:01 2022] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
[Tue Jan 18 20:12:01 2022] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
[Tue Jan 18 20:12:01 2022] Descriptor sense data with sense descriptors (in hex):
[Tue Jan 18 20:12:01 2022]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[Tue Jan 18 20:12:01 2022]         06 b0 18 98
[Tue Jan 18 20:12:01 2022] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
[Tue Jan 18 20:12:01 2022] sd 0:0:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 00 06 b0 18 98 00 00 00 08 00 00
[Tue Jan 18 20:12:01 2022] end_request: I/O error, dev sda, sector 112203928
[Tue Jan 18 20:12:01 2022] ata1: EH complete
[Tue Jan 18 20:12:01 2022] md/raid1:md2: read error corrected (8 sectors at 102750648 on sda5)
[Tue Jan 18 20:12:01 2022] read error corrected, md2, sda5 index [0], sector 102750648 [fix_read_error]
[Tue Jan 18 20:12:01 2022] md/raid1:md2: redirecting sector 102748584 to other mirror: sdb5
[Tue Jan 18 20:21:27 2022] Synotify use 16384 event queue size
[Tue Jan 18 20:21:27 2022] Synotify use 16384 event queue size
[Tue Jan 18 20:23:05 2022] init: synoscheduler-vmtouch main process (15021) killed by TERM signal
[Tue Jan 18 20:24:39 2022] init: synoscheduler-vmtouch main process (7185) killed by TERM signal
[Tue Jan 18 20:25:43 2022] init: pkg-img_backupd main process (15222) killed by KILL signal
[Tue Jan 18 20:27:50 2022] init: synoscheduler-vmtouch main process (7669) killed by TERM signal
[Tue Jan 18 20:28:44 2022] init: synoscheduler-vmtouch main process (9015) killed by TERM signal
[Tue Jan 18 20:38:48 2022] init: synoindexd main process (11848) killed by KILL signal
[Wed Jan 19 06:46:55 2022] ata1.00: read unc at 112445696
[Wed Jan 19 06:46:55 2022] lba 112445696 start 9453280 end 5860326239
[Wed Jan 19 06:46:55 2022] sda5 auto_remap 0
[Wed Jan 19 06:46:55 2022] ata1.00: exception Emask 0x0 SAct 0x1ffff SErr 0x0 action 0x6
[Wed Jan 19 06:46:55 2022] ata1.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/40:00:f8:c8:b3/00:00:06:00:00/40 tag 0 ncq 32768 in
[Wed Jan 19 06:46:55 2022]          res 41/40:00:00:c9:b3/00:00:06:00:00/40 Emask 0x409 (media error) <F>
[Wed Jan 19 06:46:55 2022] ata1.00: status: { DRDY ERR }
[Wed Jan 19 06:46:55 2022] ata1.00: error: { UNC }
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/80:08:38:c9:b3/00:00:06:00:00/40 tag 1 ncq 65536 in
[Wed Jan 19 06:46:55 2022]          res 41/40:0c:38:c9:b3/40:00:06:00:00/40 Emask 0x9 (media error)
[Wed Jan 19 06:46:55 2022] ata1.00: status: { DRDY ERR }
[Wed Jan 19 06:46:55 2022] ata1.00: error: { UNC }
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/08:10:d0:52:d0/00:00:01:00:00/40 tag 2 ncq 4096 in
[Wed Jan 19 06:46:55 2022]          res 41/40:0c:38:c9:b3/40:00:06:00:00/40 Emask 0x9 (media error)
[Wed Jan 19 06:46:55 2022] ata1.00: status: { DRDY ERR }
[Wed Jan 19 06:46:55 2022] ata1.00: error: { UNC }
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/08:18:e0:52:d0/00:00:01:00:00/40 tag 3 ncq 4096 in
[Wed Jan 19 06:46:55 2022]          res 41/40:0c:38:c9:b3/40:00:06:00:00/40 Emask 0x9 (media error)
[Wed Jan 19 06:46:55 2022] ata1.00: status: { DRDY ERR }
[Wed Jan 19 06:46:55 2022] ata1.00: error: { UNC }
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/08:20:f0:52:d0/00:00:01:00:00/40 tag 4 ncq 4096 in
[Wed Jan 19 06:46:55 2022]          res 41/40:0c:38:c9:b3/40:00:06:00:00/40 Emask 0x9 (media error)
[Wed Jan 19 06:46:55 2022] ata1.00: status: { DRDY ERR }
[Wed Jan 19 06:46:55 2022] ata1.00: error: { UNC }
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/08:28:f8:52:d0/00:00:01:00:00/40 tag 5 ncq 4096 in
[Wed Jan 19 06:46:55 2022]          res 41/40:0c:38:c9:b3/40:00:06:00:00/40 Emask 0x9 (media error)
[Wed Jan 19 06:46:55 2022] ata1.00: status: { DRDY ERR }
[Wed Jan 19 06:46:55 2022] ata1.00: error: { UNC }
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/08:30:00:53:d0/00:00:01:00:00/40 tag 6 ncq 4096 in
[Wed Jan 19 06:46:55 2022]          res 41/40:0c:38:c9:b3/40:00:06:00:00/40 Emask 0x9 (media error)
[Wed Jan 19 06:46:55 2022] ata1.00: status: { DRDY ERR }
[Wed Jan 19 06:46:55 2022] ata1.00: error: { UNC }
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/08:38:08:53:d0/00:00:01:00:00/40 tag 7 ncq 4096 in
[Wed Jan 19 06:46:55 2022]          res 41/40:0c:38:c9:b3/40:00:06:00:00/40 Emask 0x9 (media error)
[Wed Jan 19 06:46:55 2022] ata1.00: status: { DRDY ERR }
[Wed Jan 19 06:46:55 2022] ata1.00: error: { UNC }
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/08:40:10:53:d0/00:00:01:00:00/40 tag 8 ncq 4096 in
[Wed Jan 19 06:46:55 2022]          res 41/40:0c:38:c9:b3/40:00:06:00:00/40 Emask 0x9 (media error)
[Wed Jan 19 06:46:55 2022] ata1.00: status: { DRDY ERR }
[Wed Jan 19 06:46:55 2022] ata1.00: error: { UNC }
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/08:48:18:53:d0/00:00:01:00:00/40 tag 9 ncq 4096 in
[Wed Jan 19 06:46:55 2022]          res 41/40:0c:38:c9:b3/40:00:06:00:00/40 Emask 0x9 (media error)
[Wed Jan 19 06:46:55 2022] ata1.00: status: { DRDY ERR }
[Wed Jan 19 06:46:55 2022] ata1.00: error: { UNC }
[Wed Jan 19 06:46:55 2022] ata1.00: failed command: READ FPDMA QUEUED
[Wed Jan 19 06:46:55 2022] ata1.00: cmd 60/08:50:20:53:d0/00:00:01:00:00/40 tag 10 ncq 4096 in
[Wed Jan 19 06:46:55 2022]          res 41/40:0c:38:c9:b3/40:00:06:00:00/40 Emask 0x9 (media error)